Seasoft 3mm Wetsuit Scuba Diving Hood

Description

If the temperature is getting colder and your hood is getting thinner, you're going to get cold. You will not find any seams down the middle of the chin either. And, when you consider that 35% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. This leaves less room for cold water to occupy under your hood, this helps to maintain warmth as well. The Seasoft Pro3 Wetsuit Hood use 3mm neoprene with triple glued and double bond stitched seams for strength and durability. The 3mm material is going to naturally fit and stretch around your head better. The Seasoft Pro3 Wetsuit Hood use 3mm neoprene with triple glued and double bond stitched seams for strength and durability. The 3mm material is going to naturally fit and stretch around your head better. The hood is available in multiple sizes and is black in color. There are also two very small holes for air to escape from the inside crown of the hood in case air enters your hood with a thin baffle built over the holes to prevent water from entering. The hood has titanium flakes foil technology that creates 2-layers of titanium Foil that reflects cold away and reflects your heat in keeping you warmer than hoods without this technology. This seam, found in almost all hoods today, can cause jaw fatigue.

Key Features

• The 3mm material is going to naturally fit and stretch around your head better.
• If the temperature is getting colder and your hood is getting thinner, you're going to get cold.
• There are also two very small holes for air to escape from the inside crown of the hood in case air enters your hood with a thin baffle built over the holes to prevent water from entering.
• When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner.
• All of Seasoft's Titanium Pro Hoods have 5 different types of nylon-2 neoprene including compressed neoprene for the back-3 panels of the hood.
• The Seasoft Pro3 Wetsuit Hood use 3mm neoprene with triple glued and double bond stitched seams for strength and durability.